Student's Work in the Digital Signal Processing Laboratory

The main educational purpose of the Digital Signal Processing Laboratory is to give practical training and hands-on experience to those students who would like to learn digital signal processing in detail. To achieve this goal, there are many possibilities for students to work in the laboratory:

• Project laboratory, which is a 2-semester course dedicated for making the first own design in the field
• Bachelor's Thesis writing 
• Master's Thesis writing, which is a 1-semester full-time course
• Students' Scientific Contest, which is an annual contest among students to present innovation, scientific research and development results.

The devices and tools in the laboratory support the solution of many kind of signal processing problems. These problems can be in the field of measurement, control, medical or audio signal processing, or from any other field where digital signal processing shall be used. The characteristic of the problem and the solution can be hardware, software or theoretical, or any combination of these. In the case of software solutions, the programming is done partly in assembly, partly in C language, while for supporting and testing theoretical derivations, the MATLAB environment can be used. In hardware problems it is possible to design analog as well as digital circuitry.

To solve the problems discussed above, you do not need to be a professional DSP programmer. Naturally it helps if you have some background in signals and systems, but most of the know-how can be picked up by working on the problem. However, we would really like to achieve if by the end of the course, not only simulations and calculations were done but working programs and circuits as well.

Who are welcome in the DSP laboratory?

• Those, who know digital signal processing, and has have a certain problem to be solved;
• Those, who do not know digital signal processing, but would like to learn it;
• Those, who would like to learn signal processing and modeling theory in details;
• Those, who like or would like to know programming close-to-hardware and would like to work on high performance digital signal processors;
• Those, who would like to design hardware containing both analog and digital part.

In the following, some of the M.Sc. and B.Sc. theses written in our laboratory are listed. The one page abstracts are available by clicking on the title of the thesis. Note that most of the theses were written in Hungarian.

M.Sc. theses

Active noise control

 

Student	Thesis title	Supervisor	Year
András Gajdács	Development of a GPU-based active noise control system	László Sujbert	2016
Attila Szarvas	Efficiency testing of active noise control by acoustic field modeling	László Sujbert	2013
Arnold Pető	Active control of fan noise	László Sujbert	2012
Tibor Ébner	IIR filters in active noise control	László Sujbert	2009
Donát Csofcsics	Active noise control demo system with user-friendly interface	László Sujbert	2008
Gábor Székely	Sensor network based active noise control system with user-friendly interface	László Sujbert	2008
András Horváth	Demonstration system for active noise control	László Sujbert	2007
László Lajkó	On-line identification in active noise control systems	László Sujbert	2006
György Orosz	Implementation of adaptive signal processing methods in sensor networks	László Sujbert	2006
László Dobos	Hybrid active noise control in headsets	László Sujbert	2005
Gergely Juhász	Active acoustic echo cancellation	László Sujbert	2005
Tibor Csohány	Active magnetic shielding	László Sujbert	2004
Ákos Faragó	Active distortion control of shakers	László Sujbert	2003

 

 

Audio signal processing and sound synthesis

 

Student	Thesis title	Supervisor	Year
Nándor Gera	Acoustic Beamforming using Microphone Arrays	György Orosz	2020
András Konyári	Model-based sound synthesis of the Hammond organ	Balázs Bank	2020
Máté Szegszárdy	Physics-based sound synthesis of cymbals using the finite element method	Balázs Bank	2020
Zoltán László Forrai	Design of a directional loudspeaker array	Balázs Bank	2018
Szilárd Gungl	Vibration analysis of steering servo motors	György Orosz	2018
Géze Herman	Physics-based guitar synthesis	Balázs Bank	2018
Tamás Varjasi	Implementation of a physics-based drum synthesizer in embedded environment	Balázs Bank	2017
Márton Péter Nika	Developments to a physics-based bass synthesizer	Balázs Bank	2017
Balázs Pirkó	Chord recognition and automatic improvisation	Balázs Bank	2016
Kristóf Szabolcs Horváth	Rounding effects in audio filters	Balázs Bank	2015
Gábor Gyurász	Real-time modeling of a tube overdrive pedal	Balázs Bank	2015
Tibor Simon	Nonlinear modeling of loudspeakers	Balázs Bank	2015
Gergely Zoltán Horváth	Acoustic beamforming	László Sujbert, László Balogh (ProDSP Kft.)	2014
Péter Frenyó	Indoor acoustic localization and source classification	György Orosz	2014
Dávid Székely	Real-time synthesis of the sound of keyboard instruments	László Sujbert	2013
János Balázs	Beat detection and correction for DJ applications	Balázs Bank	2013
Péter Szalontai	Physics-based electronic percussion instrument	Balázs Bank	2012
Zsolt Németh	Sound source localization with a microphone array	László Balogh	2011
Márton Albert	Digital sound synthesis of two-dimensional vibrating bodies	László Sujbert, Rudolf Rabenstein	2010
Róbert Galambos	Investigation of time stretch and pitch shift algorithms	László Sujbert	2009
Zsolt Garamvölgyi	Physics-based modeling of membranes for sound synthesis applications	Balázs Bank	2008
Sándor Róbert Papp	Digital synthesis of violin sound	László Sujbert	2007
József Bodor	Audio noise reduction using filter banks	László Sujbert	2007
Levente Bódor	Digital processing of music for the control of fountains	László Sujbert	2007
Szilveszter Varga	Digital equalizer	László Sujbert	2006
Szilveszter Balogh	Sound synthesis of the piano using the  ADSP-21061 DSP	Balázs Bank	2005
Adél Veronika Makai	DSP based reverberator	László Sujbert	2005
András Schmied	Sound synthesis of the organ using the  ADSP-21065L DSP	János Márkus	2005
Lajos Rancz	Sound synthesis of bells	László Sujbert	2004
László Egri	Acoustic feedback compensation in PA systems	László Sujbert	2003
Balázs Cserháti	Real-time sound synthesis of the piano	László Sujbert	2002
András Zoltán Csaba	Real-time sound synthesis of electric guitars	László Sujbert	2002
László Tóth	Noise reduction of speech signals by filter banks	László Sujbert	2001
Balázs Bank	Physics-based sound synthesis of the piano	László Sujbert	2000
János Márkus	Signal model based sound synthesis of the organ	László Sujbert	1999

 

 

Distributed signal processing and sensor networks

 

Student	Thesis title	Supervisor	Year
András Palkó	Spectral Estimation in Case of Data Loss	László Sujbert	2019
Balázs Varga	Investigation of Adaptive Distributed Signal Processing Systems	György Orosz	2018
András Horváth	Acoustic monitoring of human activity using sensor network	György Orosz	2013
Szilárd Ratting	Mobile surveillance system	Tamás Krébesz	2013
Tamás Benyhe	Implementation of an In-Premise Display Device based on ZigBee Smart Energy Profile	László Sujbert, Gábor Füredi (Prolan Smart Energy Rendszerház Kft.)	2013
Károly Molnár	Modeling of a distributed real-time signal processing systems	László Sujbert	2003

 

 

Measurement technology

 

Student	Thesis title	Supervisor	Year
Aizhan Beisenbay	Automated functional test of wireless embedded transmitter	Tamás Krébesz	2019
Dávid Dudás Bence	Development of a Force-sensing Resistor-based Force Measurement System	László Sujbert	2019
Dániel Husztik	Prototype development of an industrial ultrasonic system for acceleration of fermentation	László Sujbert	2018
Gábor Grabicza	Modelling of Power Electronic Systems from the Aspect of Parasitic Effects due to Layout	György Orosz, András Mersich (Robert Bosch Kft.)	2018
Erika Nagy	Embedded automated testing of wireless ISM band communication device	Tamás Krébesz	2016
Bendegúz Bence Szatmári	Development of a semi-automatic testing system for the charger unit of an electric vehicle charging station	György Orosz ,  István Szatmári (evopro Innovation Kft.)	2016
Zsolt Vincze	Implementation of alternative-source battery charger for automated embedded measurement system	Tamás Krébesz	2015
Tibor Rácz	Development of automatic tester for electronic accumulator sensor	László Sujbert, Gábor Bárány (Robert Bosch Kft.)	2015
András Finta	Development of a universal actuator tester	László Sujbert, Tamás Gusztáv (Audi Hungária Motor Kft.)	2013
Dávid Kalocsai	Measurement of carbon dioxide emission for medical purposes	György Orosz	2012
Tamás Gusztáv	Sensor simulator for engine control units	László Sujbert	2008
Andor Kovács	Position estimation of brushless DC motors without angle sensor	László Sujbert	2007
Viktor Huszár	Thermic modeling of the EPAS PowerPack module	János Márkus	2007
Zsombor Simon	Digitally controlled gas mixer	László Sujbert	2006
Balázs Sántha	DSP based system for the measurement of the transcellular impedance of confluent cell layers	László Sujbert	2005

 

 

Further DSP topics

 

Student	Thesis title	Supervisor	Year
László Ossik	Computer Aided Visual Analysis of Printed Circuit Boards	György Orosz	2020
Ilker Dindoruk	Performance evaluation and simulation of the physical layer of an embedded communications system in MATLAB	Tamás Krébesz	2019
Maroua Manai	Performance evaluation and simulation of the physical layer of an embedded communications system in LabVIEW	Tamás Krébesz	2019
Zsombor Borbély	Information processing on SDR platform based on complex envelopes	Tamás Krébesz	2018
Dávid Kosdi	Analysis of the effects of sampling jitter on sine estimation methods	Vilmos Pálfi	2018
Koblász Kolos	Methods for linearization of power amplifiers	László Sujbert	2017
Kálmán Benjamin Szőke	Efficient implementation of adaptive FIR filters for active noise control applications	László Sujbert	2016
Judit Borszuk	GIS data processing for agriculture	Tamás Krébesz, Ákos Dömötör (ITineris Kft.)	2016
Bálint Gyenes	Evaluation of digital telecommunications system implemented on PXI platform	Tamás Krébesz	2015
Bálint István Magyar	Design of hardware and software components of a processor-based radio amateur transceiver	György Orosz	2015
Balázs Bencze	Recognizing electronic devices using soft computing methods	Károly Molnár	2011
Sándor Cserháti	Development of an AD converter extension board for Blackfin DSP	László Balogh, Károly Molnár	2010
Tibor Balogh	Adaptive signal processing - design of laboratory exercises	László Sujbert	2008
István Bogár	Design of an eight channel data recorder	László Sujbert	2004
Tamás Tölyhi	Design of a programmable digital filter	László Sujbert	2004

 

Other topics

 

Student	Thesis title	Supervisor	Year
András Káli	Wireless communication architectures for IoT system	Tamás Krébesz	2020
Bence Kotnyek	AUTOSAR XCP module implementation	László Sujbert, László Szikszay (Thyssenkrupp Components Technology Hungary Kft.)	2020
Mihály Péter Nagy	Design of data acquisition system for distributed processing of periodic signals	Vilmos Pálfi	2020
Róth Ádám Gábor	Exploration and Visualization of Memory Damage of Automotive Controllers	László Sujbert, Tímea Knoll  (thyssenkrupp Components Technology Hungary Kft.)	2018
Csanád Smikál	Development of AUTOSAR Software Components Using Text-based DSLs	László Sujbert, Ferenc Kadlecsik  (thyssenkrupp Components Technology Hungary Kft.)	2018
Zoltán Schmidt	Measurement-system development for system testing of mechatronical components	Tamás Krébesz	2017
István Ratkovszki	Automated, model-based safety analysis	László Sujbert; András Balogh, Dénes Monostori  (ThyssenKrupp Presta Hungary Kft.)	2017
Tamás Bányai	Implementation of an intelligent CAN switch	László Sujbert, András Balogh(ThyssenKrupp Presta Hungary Kft.)	2016
Dániel Marton	Development of a programmable sensor simulator	László Sujbert, András Balogh(ThyssenKrupp Presta Hungary Kft.)	2016
Dániel Molnár	Design and software implementation of a wireless SmartMeter	György Orosz, Károly Molnár  (ProDSP Technologies Kft.)	2016
Eszter Tóth	Design of the hardware elements of a wireless SmartMeter network	György Orosz, Károly Molnár  (ProDSP Technologies Kft.)	2016
Tamás Kardos	Development of IO-Link RS232 converter	Tamás Krébesz, Zoltán Kása  (Balluff Elektronika Kft.)	2016
Gergely Horváth	Development of an Autonomous Car Model	László Sujbert, András Balogh(ThyssenKrupp Presta Hungary Kft.)	2016
István Vadász	Development of a Bluetooth-based Handheld Device for Sports Application	László Sujbert, Károly Molnár(ProDSP Kft.)	2015
Balázs Hegyi	Development of an AUTOSAR Network Management Project	László Sujbert, Gergely Pintér(ThyssenKrupp Presta Hungary Kft.)	2015
Gábor Veres	Implementation of an AUTOSAR TCP/IP Stack	László Sujbert, András Balogh (ThyssenKrupp Presta Hungary Kft.)	2015
Benedek István Kupper	Authentication and Cryptography in Automotive Embedded Systems	László Sujbert, András Balogh (ThyssenKrupp Presta Hungary Kft.)	2014
Dániel Faragó	Eclipse based vehicle bus visualization	László Sujbert, Gergely Pintér(ThyssenKrupp Presta Hungary Kft.)	2014
Bálint Csengeri	Design of Data Aquisition and Control Units for Plastic Greenhouse	György Orosz, Károly Molnár (ProDSP Kft.)	2014
Zsombor Pethő	Development of a continuous SW integration environment	László Sujbert, Ferenc Varga (ThyssenKrupp Presta Hungary Kft.)	2014
Gergely Sisak	Eclipse based vehicle bus simulation	László Sujbert, Gergely Pintér(ThyssenKrupp Presta Hungary Kft.)	2014
Attila Norbert Dajka	Development of firmware loader application for various processors	György Orosz	2013
Viktor Plihál	Automated test system providing traceability in industrial applications	Tamás Krébesz	2012
Balázs Mészáros	Development of intelligent camera components	György Orosz, Károly Molnár (ProDSP Kft.)	2012
Gábor Máté Csák	Conformance testing of AUTOSAR software modules	László Sujbert, Gergely Pintér	2012
Ákos Horváth	Testing of BOSCH Body Computers by EMC scanning	Sándor Kerekes, György Orosz, László Balogh	2012
Tamás Végh	Development of an inductive flow meter control unit	Károly Molnár	2012
Balázs Kővári	A graphical library for embedded systems	László Balogh	2011
Tamás Kovács	Development of an intelligent fleet management device	Károly Molnár	2010
Tamás Szalma	Development of an intelligent fleet management hardware	Károly Molnár	2010
Laura Fábián	Automatic code generation for the MITMÓT ARM platform in Matlab-Simulink environment	János Márkus	2007

 

 

B.Sc. theses

Active noise control

 

Student	Thesis title	Supervisor	Year
Bence László Ország	Active Noise Control without Microprocessor	László Sujbert	2020
Martin Fónai	Implementation of Adaptive Signal Processing Algorithms on ARM Cortex Microcontrollers	György Orosz	2019
Attila Szarvas	Novel method for personal active noise control	László Sujbert	2012
György Bicsák	Possibilities of the utilization of active noise control on jet airplanes	László Sujbert, József Rohács	2010
Balázs Kun	Design of microcontroller-based active vibration control module	László Sujbert	2010

 

 

Audio signal processing and sound synthesis

 

Student	Thesis title	Supervisor	Year
Kristóf Horváth	Development of an Experimental Modal Analysis Software and its Integration into an Automotive Acoustic Development Process	György Orosz, Tibor Kimpián (Thyssenkrupp Components Technology Hungary Kft.)	2020
Bence Szilágyi	Tempo detection using an EFM32 Giant Gecko 32 bit microcontroller	Balázs Bank	2020
Helén Szemerey	Automatic transcription of music recordings	Balázs Bank	2019
Máté Szegszárdy	Physics-based sound synthesis of the clarinet	Balázs Bank	2018
Péter Rozmán	Real-time chord recognition using Android platform	Balázs Bank	2018
Nándor Gera	Real-time acoustic source localization using a stereo microphone	György Orosz	2018
László Ossik	Intelligent acoustic object recognition in home environment	György Orosz	2018
Barnabás Németh	Physics-based sound synthesis of the acoustic guitar	Balázs Bank	2017
András Márton Konyári	Development of a digitally compensated active loudspeaker	Balázs Bank	2017
Gergely Horváth	Development of a rythm trainer application	Balázs Bank	2017
Gábor Zoltán Bánkuti	Modelling of a solid-state distortion circuit	Balázs Bank	2017
Dániel Bányay	Virtual drum controller using acceleration sensors	Balázs Bank	2017
Zoltán László Forrai	Measurement and equalization of loudspeaker responses	Balázs Bank	2016
Dávid Zsolt Pituk	Tuner application on Android platform	Balázs Bank	2016
Szilárd Gungl	Singing trainig application	Balázs Bank	2015
Ádám Makovecz	FM synthesizer in VST environment	Balázs Bank	2014
Márton Nika	Physics-based bass guitar synthesizer	Balázs Bank	2014
Gergő Szabó	Physics-based guitar synthesis	Balázs Bank	2013
András Gajdács	Acoustic ray-tracing using GPUs	Balázs Bank	2013
Dániel Ambrits	Modeling of analog synthesizers using various oscillator algorithms	Balázs Bank	2012
Tibor Simon	Modeling of the Ibanez WH10 wah-wah pedal in iOS environment	Balázs Bank	2012
Péter Molnár	Implementation of a multichannel reverb in VST environment	Balázs Bank	2012
Tibor Fülöp	Automatic key detection of music tracks	Balázs Bank	2012
Balázs Mészáros	Design of a sound level meter	István Bogár, László Sujbert	2011
Ádám Csörnyei	Wireless transmission and digital processing of the signal of electric guitar	László Sujbert	2010
Dániel Turi	Audio signal filtering using different noise models	László Sujbert	2010
Péter Szalontai	Development of a virtual analog synthesizer	Balázs Bank	2009
Róbert Stolczenberger	Design of a digital guitar tuner	László Sujbert	2009
Demjén Ádám	Implementation of organ sound synthesis in VST environment	László Sujbert	2009

 

 

Distributed signal processing and sensor networks

 

Student	Thesis title	Supervisor	Year
Attila Door	Reconfiguration in sensor networks	György Orosz	2015
Bendegúz Bence Szatmári	Electronic design of a model car with wireless communication	György Orosz	2014
Dániel Molnár	Development of a wireless sensor network protocol	György Orosz, Károly Molnár (ProDSP Kft.)	2014
Péter Bevíz	Acoustical localization in sensor networks	György Orosz	2011
Zsolt Németh	Localization in wireless sensor networks	László Balogh	2009
Tamás Végh	Design of a Zigbee-based radio board	László Balogh	2009

 

 

Measurement technology

 

Student	Thesis title	Supervisor	Year
Dániel Kőrösi	Development of a Data Acquisition and Control System using EtherCAT Network	György Orosz, Bálint Csengeri (ProDSP Technologies Zrt.)	2019
Benedek Ruff	Investigation of Hysteresis Curve of Soft Ferromagnetic Materials	László Sujbert, Dávid Ferencz and Tivadar Tóth (Thyssenkrupp Components Technology Hungary Kft.)	2019
Tibor István Gaják	Development of a Remote Data Acquisition System using PicoScope 2207A Oscilloscope	György Orosz	2017
Dániel Ágoston Müller	Real-time measurements in embedded systems using a JTAG connection	Tamás Krébesz,  Árpád Kiss (Robert Bosch Kft.)	2017
Krisztián Hetesi	Characterization of analog-to-digital converters with standard methods	Vilmos Pálfi	2017
Ádám Attila Ötvös	Test bench development for measurement equipment of turbine control and supervision systems	László Sujbert, Gábor Molnár (GE Hungary Kft.)	2017
Grabicza Gábor	Impedance analysis using Agilent E5061B network analyzer	György Orosz	2016
Prajcer Dániel	Inductive rotor position sensor for electronic steering systems	László Sujbert, Ábel Vér (ThyssenKrupp Presta Hungary Kft.)	2015
Balázs Varga	Design of a frequency transposition module for baseband signal processing on DSP	György Orosz	2014
Tamás Bányai	Interfacing of an Analogue Angle Sensor to FPGA	László Sujbert, András Balogh (ThyssenKrupp Presta Hungary Kft.)	2014
Dániel István Marton	Pulse-width Modulation Based Motor Control Using FPGA	László Sujbert, András Balogh (ThyssenKrupp Presta Hungary Kft.)	2014
Dániel Rácz	Development of a testing environment for tachometer analysis	László Sujbert, Tamás Gusztáv (Audi Hungária Motor Kft.)	2013
Bálint Zsiga	Development of hardware and software environment for calibration of an intertial navigation device	László Sujbert, Bálint Vanek (MTA SZTAKI)	2013
Sándor Kertész	Development of an intelligent pressure meter	László Sujbert	2012
Sándor Goda	Design of a passive artificial load using NI modules	László Sujbert, Bora István (NI Hungary Kft)	2012
Anna Mályusz	Digital signal processor-based universal laboratory instrument	György Orosz	2012
Balázs Bencze	Development of a GPS based trace tracking system	Károly Molnár	2008
Gergely Illés	Increasing the precision of a GPS receiver with an accelerometer sensor	Károly Molnár	2008

 

 

Further DSP topics

 

Student	Thesis title	Supervisor	Year
Izsák Hermann	Replacement of battery management system microcontroller with keeping its functionality	Balázs Renczes, Ádám Szabó (Xtalin Kft.)	2020
Áron Bálint	Investigation of the Efficiency of Different Digital Signal Processing Algorithms on SBC Platforms	György Orosz	2019
Dániel Papp	Efficient approximation of wind turbine characteristic	Balázs Renczes	2019
Károly Tóth	Information processing on USRP platform	Tamás Krébesz, András Bükkfejes (National Instruments)	2018
Bence Szabó	Compensation of torque ripple in BLDC motors	Tamás Virosztek, Vilmos Pálfi	2018
Péter Simonek	Realization Issues of Recursive Spectrum Estimation Algorithms in Embedded Systems	György Orosz	2017
Gergely János Czupy	Nonlinear system identification - a practical approach	László Sujbert	2017
Tamás Sági	Image processing development for intelligent supervising system of a manufacturing conveyor	László Sujbert, László Anka (Robert Bosch Kft.)	2017
Bence Beregi	Design of an SPDIF Stream Analyzer Hardware Using Analog Devices DSP	György Orosz, Imre Kovács (Lightware kft.)	2014
Balázs Tamás Szekeres	Design of software components of an electronic scale	György Orosz	2013
Marcell Rátky	Development of a sleep monitoring system	László Sujbert, Péter Tatai (AITIA International Zrt.)	2013
Gábor Bihari	Design of a microcontroller-based metal detector	György Orosz	2012
Bálint István Magyar	Design of a low IF digital signal processing unit for radio amateur purposes	György Orosz	2012
László Hasznos	Implementation of digital signal processor based metal detector	György Orosz	2012

 

Other topics

 

Student	Thesis title	Supervisor	Year
Péter Gyulai	Dataflow-based development of IoT measurement system	Tamás Krébesz	2020
Dávid Lőz	Implementation of an AUTOSAR End-to-End Communication Protection Library Module	László Sujbert, László Szikszay (Thyssenkrupp Components Technology Hungary Kft.)	2020
Levente Vajay	Implementation of AUTOSAR Diagnostic Log and Trace module	László Sujbert, László Szikszay (Thyssenkrupp Components Technology Hungary Kft.)	2020
Árpád Varga	The Installation of a new Building Automation System of Medical School in University of Pécs	György Orosz, Dániel Éles (Gróf Épületautomatikai Kft.)	2020
Balázs Zombó	IoT-based automated systems	Tamás Krébesz	2020
György Fekets	Implementation of security solutions in embedded automotive systems	Tamás Krébesz, Gergely Pintér (Thyssenkrupp Components Technology Hungary Kft.)	2019
Dániel Gracia	The application of Snippet in RPG programming	Balázs Renczes, András Kern (Unicredit Services S.C.p.A.)	2019
Marcell Magyar	Implementation of AUTOSAR Large Data COM module	Tamás Krébesz, László Szikszay (Thyssenkrupp Components Technology Hungary Kft.)	2019
Ágoston Pető	Implementation of control via USB port based on IoT device for an embedded system	Tamás Krébesz	2019
Kristóf Somogyi	Signal synthesis and analysis on software-defined basis	Tamás Krébesz	2019
Attila Szabó	Device Driver Development Based on Automotive Standard	László Sujbert, László Szikszay (Thyssenkrupp Components Technology Hungary Kft.)	2019
Noel Törjék	Implementation of the Control and Image Processing of a Video Recorder Robotic Arm	György Orosz	2019
Attila Károly Kanál	Implementation of AUTOSAR network management modules	László Sujbert, Balázs Hegyi (ThyssenKrupp Presta Hungary Kft.)	2017
Szabolcs Szentpéteri	Fault injection testing on AUTOSAR memory stack	László Sujbert, Zoltán Teveli (ThyssenKrupp Presta Hungary Kft.)	2017
Áron Járó	Development of control software for thread-based sensor network	László Sujbert, Károly Molnár (ProDSP Technologies Kft.)	2017
Tamás Király	IP-XACT based register management and generator implementation	Tamás Krébesz, Tamás Olaszi (ARM)	2017
Tamás Sándi	Script based vehicle bus simulation	László Sujbert, Dániel Faragó (ThyssenKrupp Presta Hungary Kft.)	2017
Sándor Bódis	Development of Battery Pack Management System using Rapid Control Protoryping	György Orosz, Dániel Bérces (AVL AUTÓKUT Mérnöki Kft.)	2016
Tamás Páni	Development of an USB-MIDI Interface	György Orosz	2016
Csanád Smikál	High level test specification language for PIL tests	László Sujbert, András Balogh (ThyssenKrupp Presta Hungary Kft.)	2016
Péter Kiss-Vincze	Real-time message converter device for automotive communication protocols	László Sujbert, Dániel Faragó (ThyssenKrupp Presta Hungary Kft.)	2016
Bálint Csonka	Testing of automotive components in simulation environment	László Sujbert, László Hasprai (Audi Hungaria Motor Kft.)	2016
Dávid Németh	Application based inline flash station control	Balázs Bank	2016
Márton Ferenczy	Automatic test device for BLDC motor driver	László Sujbert,  András Balogh ThyssenKrupp Presta Hungary Kft.)	2015
Gábor Kevin Barta	Testing of AUTOSAR I-PDU Multiplexer software module	László Sujbert, László Szikszay (ThyssenKrupp Presta Hungary Kft.)	2015
Farkas Péter	Optimization of aluminium bonding process	Tamás Krébesz, Gábor István Szekeres (Robert Bosch Elektronika Kft.)	2015
Milán Pataki	Recognition of traffic manoeuver based on probability model	Tamás Krébesz, Attile Bodnár (Bosch Magyarország Kft)	2015
Tamás Kocsis	Realization of the test environment for a DSP-based measurement device	György Orosz, Károly Molnár (ProDSP Kft.)	2014
Eszter Tóth	Design of a video receiver card	György Orosz, Károly Molnár (ProDSP Kft.)	2014
Bálint Kanyó	Diagnostic Software for Automotive Electronic Control Units	László Sujbert, András Balogh (ThyssenKrupp Presta Hungary Kft.)	2014
József Takács	Development of a CAN Partial Network Device	László Sujbert, András Balogh (ThyssenKrupp Presta Hungary Kft.)	2014
Dávid Somogyi	Tamper-proof hardware design	László Sujbert, Károly Molnár (ProDSP Technologies Kft.)	2014
Benedek Pour	Hardver analysis and testing of a steering column control unit	László Sujbert, András Balogh András (ThyssenKrupp Presta Hungary Kft.)	2013
Levente Xavér Balogh	Development of automatic tester for a desk simulator device of an EBS/ABS braking system	László Sujbert, Csaba Horváth (Knorr Bremse Fékrendszerek Kft.)	2013
Gergely Horváth	Implementation of an avalanche detector	László Sujbert, Zoltán Baranyai (ThyssenKrupp Presta Hungary Kft.)	2013
István Vadász	Design of the controller card of a test device for transmission controllers	László Sujbert, Károly Molnár (ProDSP Technologies Kft.)	2013
Bálint Csengeri	Implementation of a webserver on a DSP processor	György Orosz, Károly Molnár (ProDSP Kft.)	2012
Gergely Sisak	Implementation of AUTOSAR CAN communication modules	László Sujbert, Gergely Pintér (ThyssenKrupp Presta Hungary Kft.)	2012
Dániel Faragó	Implementation of AUTOSAR FlexRay communication modules	László Sujbert, Gergely Pintér (ThyssenKrupp Presta Hungary Kft.)	2012
Lajos Nyéki	Control of analog lighting systems by DMX signals	László Sujbert	2012
András Márton Kalmár	Introducing AUTOSAR software architecture in a model-based embedded software environment	László Sujbert	2011
Ákos Horváth	Development of a radio extension board for Blackfin DSP	László Balogh, Károly Molnár	2010

 Further information: László Sujbert